Viega Programmable Heat/Cool Thermostat User Manual

1 of 13
Product
Instructions
PI-PR 566440 0114 (Programmable Heat-Cool Thermostat)
Viega LLC, 301 N. Main, 9th Floor • Wichita, KS 67202 • Ph: 800-976-9819 • Fax: 316-425-7618
Viega
®
Programmable Heat/Cool Thermostat
The Viega programmable heat/cool thermostat is easy
to install, easy to wire and easy to program. It can be
used for single stage heating and cooling applications,
making it ideal for many different applications. Installation
instructions can be found below.
Part Number 15117
Caution: Electrical Hazard
Failure to disconnect the power before beginning
to install this product can cause electrical shock or
equipment damage.
Mercury Notice:
All of our products are mercury free. However, if the
product you are replacing contains mercury, dispose of it
properly. Your local waste management authority can give
you instructions on recycling and proper disposal.
A trained, experienced technician must install this
product. Carefully read these instructions. You could
damage this product or cause a hazardous condition if
you fail to follow these instructions.
W
For vertical mount put one screw top and one screw bottom.
For horizontal mount put one screw left and one screw right.
The thermostat can be mounted directly to the wall or it can
be mounted to a wall box. Use the vertical mounting screw
location to attach to a wall box.
Menu
Mon
AM
LEAVE
Mounting the subbase
Thermostat applications guide
Description
Gas or Oil Heat Yes
Electric Furnace Yes
Heat Pump (No Aux. or Emergency Heat) Yes
Heat Pump (with Aux. or Emergency Heat) No
Multi-stage Systems No
Heat Only Systems Yes
Cool Only Systems Ye s

Viega Programmable Heat/Cool Thermostat Specifications

General

Mounting	Wall Mount
Type	Programmable
Power Method	Hardwired
Power Supply	24V AC
Display	LCD
Control Type	Digital
Accuracy	+/- 1°F (+/- 0.5°C)
Compatibility	Conventional Systems
Communication	Wireless

Summary

Mounting the Subbase

Thermostat Wiring

Wiring Tips

Typical Industry Wiring Diagrams

Viega Wiring Diagrams

Connecting Thermostats and Zone Valves

Diagrams illustrating wiring connections for thermostats, zone valves, and zone control.

Connecting Thermostats to Powerheads

Connecting to 2-Wire Powerheads

Connecting to 4-Wire Powerheads

Thermostat Settings

Gas or Electric Setup

Fahrenheit/Celsius Display

12 or 24 Hour Time

Attaching the Thermostat to the Subbase

Battery Installation

Programming the Thermostat

Installer Configuration Menu

Guide to accessing and configuring installer settings like filter reminders and delays.

Setting the Program Schedule

Setting Day of Week and Time

Step-by-step instructions for setting the current day of the week and time.

Customizing Program Schedule

Weekday Programming

Steps to customize the WAKE, LEAVE, RETURN, and SLEEP time periods for weekdays.

Saturday Programming

Steps to customize the WAKE, LEAVE, RETURN, and SLEEP time periods for Saturdays.

Sunday Programming

Steps to customize the WAKE, LEAVE, RETURN, and SLEEP time periods for Sundays.