Viega PureFlow User Manual

Product
Instructions
PI-PF 521116 1218 PureFlow Press Port Adapter (EN ES FR)
1 of 2
Viega LLC • 585 Interlocken Blvd. • Broomfield, CO 80021 • Phone (800) 976-9819 • www.viega.us
*Zero Lead identies Viega
®
products meeting the lead free requirements of NSF 61-G through
testing under NSF/ANSI 372 (0.25% or less maximum weighted average lead content).
Viega PureFlow
®
Press Port Adapter
Zero Lead ManaBloc
®
Port Connection
The water supply to the ManaBloc and the port valves
shall be turned off before attempting installation of
press adapters.
Use only sealing elements supplied with
the adapters.
1. Ensure sealing element (A) is in place and the tool
locator ring (B) is present in its factory installed position.
2. Square off tubing to proper length and insert the fitting
fully into the end of the tubing as shown. Full insertion
means tubing must be completely visible in at least two
viewing holes and may be partially visible in one.
3. Placing the PureFlow Press tool jaw over the attached
press sleeve resting it against the tool locator ring.
Press the sleeve with an appropriately sized press
jaw. DO NOT PRESS TWICE. Refer to current Viega
PureFlow Water Systems Manual for additional
pressing information.
4. Remove tool locator ring (B) and slide swivel nut (C)
over tubing as shown.
5. Ensure sealing element (A) is in place and clean of any
dirt or debris. Wet sealing element with tap water.
6. Insert the fitting into the desired port until the fitting
flange sets flush with the end of the port.
7. Thread the swivel nut (C) onto the ManaBloc port.
Hand-tighten only. Open the port valve(s) before
turning on the main water supply.
B
A
1 2
B
C
3
4
A
5
C
7
6
CAUTION
This document is subject to updates. For the most current Viega technical literature please visit www.viega.us.
Viega products are designed to be installed by licensed and trained plumbing and mechanical professionals who are familiar
with Viega products and their installation. Installation by non-professionals may void Viega LLC’s warranty.

Viega PureFlow Specifications

General

Brand	Viega
Model	PureFlow
Category	Adapter
Language	English