Viessmann 5242 User Manual

Gebrauchsanleitung
Manual
Miniatur-Lokdecoder
mit Lastregelung
Miniature Locomotive Decoder
with Load Control
5242
mit Anschlusskabeln
with wires
5243
mit 6-poligem Schnittstellenstecker nach NEM 651 „S“
with 6-pole plug as per NEM 651 “S”
1. Einleitung ............................................... 2
2. Einbau des Decoders ............................ 2
3. Überprüfung des korrekten Einbaus ...... 4
4. Programmieren des Decoders ............... 4
5. Die Konfi gurationsvariablen ................... 5
6. Problembehebung ................................. 7
7. Anwendungshinweise ............................ 8
8. Verwendung mit einer Intellibox ............. 9
9. Garantiebestimmungen .......................... 9
1. Introduction ............................................ 10
2. Installing the Decoder ............................ 10
3. Checking for correct Installation ............ 12
4. Programming of the Decoder ................ 12
5. Description of Confi guration Variables ... 13
6. Problem Solving .................................... 15
7. Application Hints .................................... 16
8. Operation with the Intellibox .................. 16
9. Warranty ................................................ 17
Fig. 1 – 7 ..................................................... 18 – 19
5243 (TT, N)
5242 (TT, N)

Viessmann 5242 Specifications

General

Brand	Viessmann
Model	5242
Category	Toy
Language	English

Summary

Introduction

Features

Key functionalities including motor control, speed steps, and function outputs.

Technical Data

Specifications like voltage, current, dimensions, and operating temperature.

Safety Warnings

Crucial safety advice regarding AC voltage pulse destruction and short circuit hazards.

Installing the Decoder

Preparation and Insulation

Ensuring smooth running and proper electrical insulation before installation.

Maximum Current Load Capacity

Details on current limits for motor (0.7A) and function outputs (0.15A).

Installing Decoder 5243 (NEM 651 Interface)

Step-by-step guide for installing the 5243 model via its interface socket.

Installing Decoder 5242 (with wires)

Step-by-step guide for installing the 5242 model using its wires.

Checking for correct Installation

Initial Testing and Diagnostics

Procedures for verifying decoder installation and wiring using a programming track.

Troubleshooting Installation Issues

Identifying and resolving common installation problems like swapped wires or shorts.

Programming of the Decoder

Programming Methods and Systems

Explains programming via DCC, Arnold, Lenz, and Märklin command stations.

Entering Configuration Values

Steps for changing decoder settings like address and speed using command stations.

The Configuration Variables of the Decoders 5242 und 5243

Address and Speed Settings

Configuration of primary/extended addresses, start, medium, and maximum voltage.

Motor Control and Effects

Settings for motor frequency, acceleration, deceleration, and light effects.

Load Control and User Settings

Parameters for load control, dimming, and user configuration registers.

Problem solving

Common Decoder Issues

Solutions for lights not working, jerky acceleration, and direction issues.

Analog Operation Problems

Troubleshooting late direction changes in analog mode due to short-time memory.

Application Hints for the Decoders 5242 and 5243

Connecting Auxiliary Functions

Guide to connecting steam generators or other auxiliary loads to function outputs.

Connecting Interior Lighting

Wiring instructions for directional and non-directional interior lighting in rail cars.

Operation of the Decoder with Intellibox or TwinCenter

System Setup and Testing

Configuring Intellibox for DCC and initial testing on programming track.

Warranty

Warranty Terms and Conditions

Details on the 2-year warranty and conditions for nullification.