1 General information 1
1.1 Technical standing 1
1.2 Information documented 1
2 Important information 1
2.1 Safety information 1
2.2 Official permits 1
2.3 Standards and regulations 1
3 The structural surroundings of the burner 2
3.1 Heating room requirements 2
3.2 The chimney connection 2
4 Transport and installation 2
4.1 De-ashing, cleaning the heat exchanger and the exhaust blower 3
4.2 The light barriers 4
4.3 The casing 4
5 The water installations 5
5.1 The safety equipment 5
5.2 Expansion 5
5.3 The burner circuit with burner control valve and storage unit valve 5
5.4 Container for extinguishing water (option) 5
6 The electrical installations 6
6.1 The positioning of the control module and control system module (option) 6
6.2 Electrical connection 6
7 Fire protection 6
7.1 Protection for the burner system against back-burn 6
7.1.1 Preventing overfilling of the combustion chamber 6
7.1.2 Preventing back-burn 6
7.1.3 The back-flash safeguard 6
7.1.4 Automatically Triggering Extinguishing System for the Burner Auger = ATEBA 7
7.2 Back-burn safeguard for the fuel supply system 7
7.2.1 Automatically Triggering System for the Material Supply System (ATSMS) 7
7.2.2 Slide valve, type MBA 7
7.2.3 Rotary valve, type MBS 7
7.2.4 Double rotary valve with pressure compensation 7
7.3 Fire protection for the fuel storage unit 7
8 Initial Start-up 8
8.1 Filling the heating system 8
8.2 The fuel for the initial start-up 8
8.3 Inspecting the installation 8
8.4 Initial start-up and handover 8
9 Spec sheets
3950-1, 2 Wood-burning Pyromat-DYN, Installation, Closed System
3950-3, 4 Wood-burning Pyromat-DYN, Installation, Open System
4500-1 Water-bearing Components, Burner Safety Devices
4600-1, 2, 3 Water-bearing Components, Heat Distribution
3010-1, 2, 3, 4, 5 Burner System Loader System, PYROMAT-DYN
3110-1 Accessories for PYROMAT-DYN, Conducting Exhaust Gas / Cleaning
4000-1 ECOTRONIC Heating Control Unit, Equipping
4020-1, 2, 3 ECOTRONIC Heating Control Unit, Module Extension, Data Transmission Lines
4030-1, 2 ECOTRONIC Heating Control Unit, Additional Heat Generators
4040-1, 2 ECOTRONIC Heating Control Unit, Heat Consumer
4050-1, 2 ECOTRONIC Heating Control Unit, Solar Energy
4090-1 ECOTRONIC Heating Control Unit, Visualisation & Remote Maintenance
1120-1, 2 Installation Services
1010-1, 2 Wood Fuels, Minimum Requirements / Instructions
1000-1, 2 General Terms of Delivery
Supplement EC attestation of conformity
To Next Page
