Need help?Do you have a question about the Viessmann VITOCELL 100-B and is the answer not in the manual?
General| Material | Steel with Ceraprotect enamel coating |
|---|---|
| Insulation | Polyurethane foam |
| Maximum Operating Pressure | 10 bar |
| Maximum DHW Temperature | 95 °C |
| Maximum operating temperature | 95 °C |
| Capacity | 120, 150, 200, 300, 500 liters |
| Insulation thickness | 100 mm |
| Weight (empty | 210 kg |
| Type | Indirect Water Heater |
| Heat exchanger | Internal spiral heat exchanger |
General safety advice to prevent accidents and material losses during operation and maintenance.
Explanation of warning symbols used to denote risks of injury, material loss, or environmental pollution.
Defines intended users and emphasizes supervision of children near the appliance.
Highlights that appliance connection and modifications must be done by authorized contractors.
Specifies that all work and settings must follow instructions and be done by qualified personnel.
Provides immediate actions for fire incidents, including switching off the system and using ABC extinguishers.
Warns against using non-tested components to prevent system damage or functional issues.
Illustrates and explains various symbols used throughout the manual for clear communication.
Defines the specific applications and systems for which the appliance is designed.
Technical specifications for the Vitocell 100-B, including capacity and system compatibility.
Technical specifications for the Vitocell 100-W, including capacity and system compatibility.
States that commissioning and user instruction must be performed by the heating contractor.
Explains that DHW temperature is set at the higher-ranking control unit.
Notes that the immersion heater temperature must be set by the heating contractor.
Outlines requirements for heating system inspection and maintenance, including frequency and contractor involvement.
Details maintenance for DHW cylinders, including anode checks and potable water filter servicing.
Instructs to use specific Viessmann replacement cables and notify a contractor for damaged lines.
Specifies that packaging waste is handled by the heating contractor for recycling.
Advises contacting the heating contractor for the correct disposal of system components and fluids.
Provides contact information for Viessmann Werke GmbH & Co. KG and Viessmann Limited for inquiries.
To Next Page
