Viessmann Vitodens 100-W WB1A-24 User Manual

Venting System
Installation Instructions
for use by heating contractor
Venting System
for Vitodens 100-W
WB1A Series
for Vitodens 200-W
WB2 Series
Read and save these instructions
for future reference.
IMPORTANT
Vitodens 200-W,
WB2-24C/24/32
Vitodens 200-W, WB2-44/60
(with preinstalled vent pipe adaptor)
Vitodens 100-W, WB1A-24/30
(with preinstalled vent pipe adaptor)
Please file in Service Binder
5285 268 v3.8 10/2008

Viessmann Vitodens 100-W WB1A-24 Specifications

General

Brand	Viessmann
Model	Vitodens 100-W WB1A-24
Category	Ventilation
Language	English

Summary

Installation Instructions

Venting System

Instructions for installing Viessmann venting systems for boilers.

Safety and General Requirements

Professional Installation and Safety

Emphasizes licensed contractors, CO hazards, and proper venting.

General Installation Information

General procedures and best practices for installing venting systems.

Venting Systems: Side Wall and Vertical (Coaxial)

Side Wall Vent Installation (Coaxial)

Layouts, components, and length requirements for side wall venting.

Vertical Vent Installation (Coaxial)

Layouts, components, and length requirements for vertical venting.

Venting Systems: Direct and Single Wall

Direct Venting (Two-pipe System)

Options, requirements, and length limits for two-pipe venting.

Single Wall Venting (Room Air Dependent)

Requirements and installation for single-wall venting systems.

Installation Details and Requirements

Component Installation Guides

Step-by-step guides for installing various venting system components.

Vent Length Requirements

Specifies maximum and minimum vent pipe lengths allowed.

Vent Termination Location Requirements

Specifies location rules for vent terminations in Canada and USA.