To Next PageTo Next PageWhat to do if an existing fault is saved on the VIET-TRUNG Controller?
If an existing fault is saved and displayed on the keypad display of your VIET-TRUNG Controller as long as power is maintained, you should: * Remove power from the drive controller. * Identify and correct the cause of the fault. * Restore power to reset the fault, if it has been corrected.
Details on connecting power supply to the drive controller terminals.
Information on connecting control signals to the drive controller terminals.
Schematic diagrams illustrating power and control wiring connections.
Specific programming steps and examples for European and North American ranges.
Specific programming steps and examples for the Asian range.
Parameter settings for selecting the type of control (2-wire, 3-wire, local).
Parameter settings for reverse operation, preset speeds, and fault reset.
Step-by-step guide to measure the input line voltage.
Steps to check external components like fuses, contactors, and cables.
Troubleshooting guide for when the drive controller fails to start.
General| Brand | VIET-TRUNG |
|---|---|
| Model | ALTIVAR 11 |
| Category | Controller |
| Language | English |
