Disclaimer and Warning
Legends
1.1 Introduction
1.Product Introduction
1.
Important NoteWarning
Q10N is a high-precision 3-axis gimbal integrated with a 10x optical
zoom, powered by 1/3 SENSOR CMOS module, approx.2.48 million
effective pixels, built in encoder with IP output only. It supports
visible optical zoom, photographing and video. The OSD can display
the yaw/pitch angle and zoom times. It features fast focus, 360°yaw
endless rotation and lighter weight design. The 3 axis gimbal can
achieve stabilization in yaw, roll and pitch. The integrated design of
damping system and gimbal can greatly reduce mechanical
vibration.
Q10N is widely used in UAV industries of public security, electric
power, fire fighting, zoom aerial photography and other industrial
applications.
Congratulations on purchasing your new Viewpro product. Please
read this entire document carefully. Failure to read or follow instruc-
tions and warnings in this document may result in damage to your
Viewpro product. Disassemble the gimbal camera by user is not
permitted, as which may cause the camera does not work normally.
Viewpro accepts no liability for damage, injury or any legal responsi-
bility incurred directly or indirectly from the use of this project. The
user shall observe safe and lawful practices including, but no limited
to, those set forth in the manual.
To Next Page
Loading...
