22.
Hardware Parameter
Gimbal Spec
Working voltage
Input voltage
Dynamic current
Idle current
500mA @ 12V
400mA @ 12V
Power consumption ≤ 3.85W
Pitch/Tilt '+60°~-90°
Roll ±85°
Yaw/Pan ±300°/±360°(IP output version)
Vibration angle Pitch/Roll: ±0.01°, Yaw：±0.01°
One-key to center √
12V
3S ~ 6S
Working environment
temp
Output
Local-storage
Control method
PWM / TTL / S.BUS / TCP
'-20℃ ~ +50℃
micro HDMI(HD output 1080P 60fps) / IP
SD card (Up to 128G, class 10, FAT32 or ex
FAT format)
4. Specification
To Next Page
Loading...