Need help?Do you have a question about the ViewQwest VESTA SMART-HOME and is the answer not in the manual?
Connect the Vesta Hub to power and network, and familiarize with reset buttons.
Steps to create a new Vesta account via the app's sign-up form and email activation.
Process for registering the Vesta Hub with your account using the app's setup.
Description of the Vesta app's home screen, device grouping, and event log.
Explanation of how devices are displayed as cards showing status and interactive buttons.
Operating with other Z-Wave devices and the step-by-step process to add a new device.
How to view the current status of added devices within the Vesta app.
Instructions on how to rename a device within the Vesta app interface.
Procedure for removing a device from the Vesta Hub and the Z-Wave network.
Identification and initial steps for dealing with devices that have become unresponsive ('failed nodes').
Step-by-step instructions for removing a failed device from the Vesta system.
Guide on replacing a failed device with a new one, preserving configurations.
Introduction to creating and managing device associations within the Vesta app.
Steps to establish a device association between devices for coordinated actions.
Procedure to remove an existing device association from the Vesta system.
Overview of how to configure device parameters on the Vesta Hub.
Steps to set specific configuration parameters for a device via the Vesta app.
Procedure to retrieve current configuration parameter values for a device.
Steps to copy devices and network info from an existing controller to a new Vesta hub.
Procedure to remove a Vesta hub acting as a slave from another controller's network.
Instructions on how to find the Vesta hub's DSK string using the Vesta application.
Methods for resetting the Vesta hub to its factory default state via hardware or app.
Instructions for rebooting the Vesta Hub using the power cycle button.
List of command classes supported by the Vesta Hub and their security requirements.
Information on Z-Wave association command classes, focusing on the LIFELINE GROUP.
How to control devices using BASIC commands for unsupported command classes.
General| Type | Smart Home Security System |
|---|---|
| Connectivity | Wi-Fi |
| Compatibility | Amazon Alexa, Google Assistant |
| Voice Control | Yes |
| Power Source | AC Power with Battery Backup |
| Mobile App | ViewQwest VESTA App (iOS & Android) |
To Next Page