ViewSonic Corporation Confidential - Do Not Copy N2201w-1M
7
7. Mechanical
The following table defines the mechanical specifications of this product for both chassis and cabinet.
8. Environmental
The following table defines the operational/storage conditions of the product.
In addition, all exterior surfaces shall have uniform texture/color.
Painting chromatism and define: base, stand, outer bezel and speaker: GM black rear cover-GM black.
GAP:
1. Panel spec :
Panel bucket to panel glass surface 2(+/-0.5) mm
The maximum acceptable gap between LCD panel and bezel shall be within 2.5mm.
Panel Section drawing
Parameter Specification
Dimension (WXHXD) 530 x 432 x 220 mm
Dimension without stand (WXHXD) 530 x 394 x 68 mm
Net Weight 7.78 Kg
Gross Weight 11.02 Kg
Net weight *without* stand 6.83 Kg
Chassis Plastic Material PC+ABS
External Plastic Chassis Components Front bezel, Back Cover, Stand, Base, Lens and Button
Exterior Chassis Color/Texture/Details Refer to Figure 1- Product ID
Chassis Component’s Color Difference Refer to Figure 1A-Color Guide
Chassis Color Drift Due to UV-Light None
Molded Plastic Workmanship shall be inspected according to ViewSonic Molded
Plastic Parts Specification, VSCMPPSPEC001V1.2.
Screen Printed Parts, Bird Logo Recess Artwork shall be provided and confirmed by ViewSonic.
Rear Label A label identifying the product name, model/serial number and
FCC ID/Logo shall be placed into the rear label recess located on
the rear panel of the chassis.
Wall Mount 100mmx100mm VESA high hole (n=4), 4mm, 0.7mm
pitch×10mm long screw mounting kit not included.
(M4*10)* 4pcs
100mm
Sample Sample of textured color chips, plastic material specification,
and Material Safety Data Sheets shall be submitted to
ViewSonic prior to Mass Production Release.
100mm
Operating Temperature
0°C to 40°C
Humidity 85% non-condensing
Altitude 0 meter to +3000 meters above sea level
Storage Temperature Follow Panel spec
Humidity 85% non-condensing
Altitude 0 meter to 12,000 meters above sea level
To Next Page
Loading...
