ViewSonic N2201w-1M - Page 27

ViewSonic Corporation Confidential - Do Not Copy N2201w-1M
24
2.4. Re-Write For DVD Firmware
Turn on the power, and set the DVD mode.
Confirm that the "OPEN" will be appeared on the screen.
Insert the Up-Date Disc. Automatic read will start and "Upgrade file detected, Upgrade?
Press PLAY key to start" will be displayed on the screen.
Press PLAY button on the remocon to start upgrade.
NOTE: Do not turn off the unit on the way or operate the keys on the unit and remocon.
Up-Date error will happen and can not be done with the Up-Date of Up-Date Disc.
After the Up-Date, Logo screen will appear.
Unplug the AC cord, then plug it in.
CHECK FOR THE FIRMWARE VERSION
Turn on the power, and set the DVD mode.
Press "SETUP" "SUBTITLE" "1" "2" "3" button on the remote control. Firmware version will
be displayed on the top bottom of the screen.
Turn off the power.
2.4.1.
2.4.2.
2.4.3.
2.4.4.
2.4.5.
2.4.6.
2.4.7.
2.4.8.
2.4.9.
080620 14:14 SASn 4
Fixed
Release date (Example: 2008.6.20, 14:14)
When the changed version displays, the Re-write will be completed.
080620 14:14 SASn 4