ViewSonic N2750w - Page 17

E
N
G
L
I
S
H
8. Select input source for your LCDTV display, via either OSD menu or
Remote control
The Source key of N2750w is the shortcut key for selection of input to display.
TV key of remote control is shortcut for TV selection.
ViewSonic N2750w 16
Connect the power cord to the N2750w then to a properly grounded AC outlet. Turn on
the AC Switch on the back of N2750w
6. Connect power cable
Press the Power
button on top of the
LCD display. Or press
the Power On (red)
button on the Remote
Control. Turn Video
source power ON.
7. Turn Power ON
AC wall socket
AC Switch
Switch to ON