E
N
G
L
I
S
H
Source Input: VGA, DVI, YPbPr
ViewSonic N2750w 34
PICTURE MENU
INPUT SELECT
PIP/POP MENU
SETUP MENU
SOUND MENU
Page 1
Page 2
Page 3
Page 4
Page 5
The menus in VGA, DVI, and YPbPr mode are as following:
In VGA Mode:
AUTO ADJUST: Auto adjust picture's Horizontal position, Vertical position, Fine
Tune and H.Size. Press to start the function.
BRIGHTNESS: To adjust the luminance of the image. (right: Max, left: low)
CONTRAST: To adjust the contrast ratio of the image. (right: high contrast, left:
low contrast)
IMAGE H.POSITION: To adjust the horizontal position of the video with .
IMAGE V.POSITION: To adjust the vertical position of the video with .
FINE TUNE: To adjust the delay time of data and clock with .
H.SIZE: To adjust the horizontal pixel clock of the video (VGA mode only).
ASPECT RATIO: To select the image size for 16:9 or 4:3 with .
INFORMATION: To show displaying mode condition (VGA mode only). Press to
show the current resolution.
TEXT/GRAPHIC MODE: To select text mode or graphic mode (VGA mode only).
COLOR TEMP ERATURE: To select the color temperature, either warm, medium
or cool.
Press MENU again of the next Menu (INPUT SELECT).
How to adjust the desired items:
Use to move cursor bar up and down ENTER to input the desired item
Use to adjust the item.
To Next Page
Loading...
