ViewSonic NMP620-P10 - Optional VESA Mount Installation; Product Specifications; Hardware Details; Networking and Power

SpecificaonVESA Mount (Oponal)
VS17044
2GB LPDDR4 (2400)
32GB
1x HDMI port
1x Micro USB 2.0 port
1x USB 3.0 Host port
Power Buon
Power Status LED
802.11 ac/b/g/n dual band Wireless LAN
Bluetooth 4.1 for BT peripherals
ASIAN POWER DEVICES INC.
WA-24Q12FU
Power Adapter*
Windows 10 IoT Enterprise
70mm*70mm*31.4mm
Black
Noce and Safety
Risk of explosion if the baery is replaced with an
incorrect type. Baeries should be recycled where
possible. Disposal of used baeries must be in
accordance with local environmental regulaons.
Modificaon of the wireless antennas, thermal soluon,
or enclosure may violate regulatory compliance
requirements and may expose the user to safety
hazards. Please do not try to repair your equipment,
and always follow the instrucons in the User Guide.
Failure to use the included ASIAN POWER DEVICES INC.
WA-24Q12FU Power Adapter may violate regulatory
compliance requirements and may expose the user to
safety hazards.
Model Name
NMP620-P10
Sale Name
Intel® Celeron® Processor N3350
Processor
Main Memory
Storage
I/O port
Networking
Buttons &
Indicators
OS
Thermal design
Dimensions
0~40℃
Operation Temp.
Color
Manufacturer: ViewSonic Corporaon
Address: 10 Pointe Dr. Suite 200. Brea, CA 92821, USA
1x USB 2.0 Host port
Fan with sink
1x Micro SD Card slot
1x LAN port
1. Secure VESA Mount onto the backboard of TV or LCD monitor with 4 screws.
2. Fasten two screws on the bottom of the case.
3. Locate to the holes and insert the screws into them and slide the case down
until it is xed.
FCC Compliance Statement
This device complies with part 15 of FCC Rules. Operaon is
subject to the following two condions:
(1) this device may not cause harmful interference, and (2)
this device must accept any interference received, including
interference that may cause undesired operaon.
Industry Canada ICES-003 Compliance:
CAN ICES-3 (B)/NMB-3(B)
Note: * Please don't use in other product. The Voltage is 12V DC output.