72
L
Lamp Settings
The projector’s lamp information and settings can be viewed and adjusted
by viewing the “Lamp Hours Information” or adjusting the “Lamp Mode”.
Lens shift
The projector’s lens can be shifted vertically by adjusting the “Lens Shift”
menu.
M
Movie Mode
A Color Mode appropriate for playing colorful movies, video clips
from digital cameras, or DVs through the PC input. Best for a low light
environment.
O
OverScan
Refers to a cropped image on your monitor’s screen. A setting on your
monitor zooms in on movie content, so that you cannot see the outermost
edges of the film.
P
Pattern
Projects a grid to be used for image adjustment and fine-tuning.
Projector Position
The projected image can be adjusted based on the installation location of
the projector, i.e. ceiling or rear projection installation.
R
RS-232
A standard code for serial communication transmission of data, used for
connection to other devices or controller vis serial port or LAN port.
S
Sharpness
Adjusts the picture quality.
Standard Mode
A Color Mode that is designed for normal viewing circumstances in a
daylight environment.
Z
Zoom Ring
Manually adjust the size of the projected image.
To Next Page
Loading...
