55
Menu Option Description
Lamp Settings
Lamp Mode
Normal: Provides full lamp brightness.
Eco: Reduces lamp power consumpon by 16% and
lowers brightness to extend the lamp life and decreases
the fan noise.
Dynamic Eco: Reduces lamp power consumpon by up to
30% depending on the content brightness level.
SuperEco+: Reduces lamp power consumpon by 60%
and lowers brightness to extend the lamp life and
decreases the fan noise.
NOTE: To control the lamp temperature, Eco Mode will be
switched on for 10 minutes in every 4 hours when the
Lamp Mode is set as SuperEco+.
Reset Lamp Hours
Resets the lamp timer after new lamp is installed. For changing
the lamp, please contact qualified service personnel.
Lamp Hours Information
Lamp Usage Time: Displays the number of hours the
lamp has been used.
Equivalent Lamp Hour: Displays the overall lamp life. The
method of calculang the equivalent light source hour is
as follows: Total (equivalent) Lamp Hour = 4 x (hours used
in Normal mode) + 2 x (hours used in Eco mode) + 1.67
x (hours used in Dynamic Eco mode) + 1 x (hours used in
SuperEco+ mode)
Closed Caption
Closed Caption Enable
Activates the function when the selected input signal carries
closed captions.
NOTE: Capons: An on-screen display of the dialogue, narraon,
and sound eects of TV programs and videos that are
closed caponed (usually marked as “CC” in TV lisngs).
• This funcon is only available when a Composite video
input signal is selected and its system format is NTSC.
Caption Version
To view captions, select CC1, CC2, CC3, or CC4 (CC1 displays
captions in the primary language in your area).
Reset Settings
Returns all settings to the factory preset values. When
using Reset Settings, the following settings will still remain:
Zoom, Keystone, Lens Shift, Language, Projector Position,
High Altitude Mode, Security Settings, Remote Control Code,
and Baud Rate, USB A Power.
To Next Page
Loading...
