MECHANICAL
Dimension
Dimension (Desktop) 344mm(W)*347.5mm(H)*147mm(D)
Width 344mm
Height (Height adjust to the bottom) 347.5mm
Depth 147mm
Monitor Weight 2.7Kg(N/W); 3.7Kg(G/W)
*Refer to Figure 1
Dimension (Head Only / Wall Mount) 344mm (W)*290mm(H)*54mm(D)
Width 344mm
Height 290mm
Depth 54mm
Monitor Weight 2.4Kg
*Refer to Figure 1
Ergonomics
Tilt Up step 1 0° to 20°±2.5°
Tilt Down N/A
Swivel Right N/A
Swivel Left N/A
Height Adjust N/A
Pivot N/A
Cabinet Material
Display Head Plastic Material Samsung starex ABS SD-0150 (94HB)
Neck/Base Plastic Material Samsung starex ABS SD-0150 (94HB)
Internal Plastic Cabinet Components
All internal plastic cabinet components shall be in
compliance with the requirements of TCO99
Front Bezel Color
The reference for the bezel is the silver color
(VA503m) and the midnight gray color (VA503b)
chip provided by ViewSonic
Neck, Base, and Rear Cover Color
The reference for the bezel is the black color
(VA503m) and the midnight gray color
(VA503b) chip provided by ViewSonic.
The color difference between any two cabinet
components shall be less than 0.80 “Delta E”,
in the 1976 CIE L*a*b Colorspace.
Rear logo color Mold type
Cabinet Color Drift Due To UV-Light
The color drift due to UV-Light shall be less than 3.0
“Delta E” in the 1976 CIE L*a*b colorspace.
Testing shall be performed according to the
requirements of ASTM Test Method D4459-93.
Cabinet Texture
Mold-Tech # 11010 used on all external textured
surfaces.
Samples
The supplier shall submit textured color chips, plastic
material specifications, and Material Safety Data
Sheets for approval.
ViewSonic Corporation VA503b-1_ VA503m-1
11
Confidential - Do Not Copy
To Next Page
Loading...
