To Next PageTo Next Page
Need help?Do you have a question about the ViewSonic VA721 and is the answer not in the manual?
General| Certification | UL, cUL, FCC-B, IC-B, CB Report, CE, NOM, TUV/GS, TUV/ERGO (covers ISO13406-2), TUV-S, TCO-99, EPA, GOST-R, PCT, SASO, PCBC, VCCI, BSMI, CCC, ENERGY STAR, ENERGY, PSB, C-TICK, Taiwan Green Mark |
|---|---|
| Market positioning | - |
| Response time | 25 ms |
| Display diagonal | 17 \ |
| Display resolution | 1280 x 1024 pixels |
| Vertical scan range | 50 - 85 Hz |
| Horizontal scan range | 30 - 80 kHz |
| Contrast ratio (typical) | 450:1 |
| Viewing angle, horizontal | 170 ° |
| Display brightness (typical) | 300 cd/m² |
| Power requirements | AC 100-240V, 50-60Hz |
| I/O ports | Analog: 1 x 15-pin mini D-sub attached cable; Power: 1 x 3-pin AC plug, (CEE22) |
| Bundled software | ViewSonic Wizard software |
| Power consumption (typical) | 30 W |
| Compatibility | PC: VGA up to 1280x1024 non-interlaced, Mac: Power Mac G3/G4 1280x1024 |
| Operating temperature (T-T) | 0 - 40 °C |
| Operating relative humidity (H-H) | 10 - 90 % |
| Package weight | 6200 g |
Weight and Dimensions| Depth (without stand) | 196 mm |
|---|---|
| Width (without stand) | 378 mm |
| Height (without stand) | 374 mm |
| Weight (without stand) | 4500 g |
Covers U.S.A., Canada, European regulations, and CE Conformity for the device.
Important guidelines for safe handling, placement, and operation of the LCD display.
Explains how to set the optimal resolution and refresh rate for screen quality.
Solutions for "No power" and "Power is ON but no screen image" problems.
