EasyManua.ls Logo

ViewSonic VA926G - Other Information; Specifications

ViewSonic VA926G
25 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ViewSonic VA926g 14
Other Information
Specifications
1
Macintosh computers older than G3 require a ViewSonic
®
Macintosh adapter. To order an adapter, contact
ViewSonic.
LCD Type
Display Size
Color Filter
Glass Surface
TFT (Thin Film Transistor), Active Matrix 1280 x 1024 LCD,
0.294 mm pixel pitch
Metric: 48 cm
Imperial: 19” (19” viewable)
RGB vertical stripe
Anti-Glare
Input Signal Video Sync RGB analog (0.7/1.0 Vp-p, 75 ohms)
Separate Sync
f
h
:24-82 kHz, f
v
:50-75 Hz
Compatibility PC
Macintosh
1
Up to 1280 x 1024 Non-interlaced
Power Macintosh up to 1280 x 1024
Resolution Recommended
and supported
1280 x 1024 @ 60, 75 Hz
1280 x 960 @ 60, 75 Hz
1024 x 768 @ 60, 70, 72, 75 Hz
800 x 600 @ 56, 60, 72, 75 Hz
640 x 480 @ 60, 75 Hz
720 x 400 @ 70 Hz
Power Voltage 100-240 VAC, 50-60 Hz (auto switch)
Display area Full Scan 376.32 mm (H) x 301.056 mm (V)
14.81" (H) x 11.87" (V)
Operating
conditions
Temperature
Humidity
Altitude
+32° F to +104° F (0° C to +40° C)
20% to 90% (non-condensing)
To 10,000 feet
Storage
conditions
Temperature
Humidity
Altitude
-4° F to +140° F (-20° C to +60° C)
5% to 90% (non-condensing)
To 40,000 feet
Dimensions Physical 412.2 mm (W) x 434.9 mm (H) x 195 mm (D)
16.2" (W) x 17.1" (H) x 7.7" (D)
Weight Physical 9.0 lbs (4.1 kg)
Regulations BSMI, CCC, PSB, C-Tick, CE,
Gost-R/Hygienic, Ukraine, TCO 5.1, SASO, UL/cUL,
FCC-B, ICES-B, E
NERGY STAR
®
Power saving
modes
On
Off
25W (Typical) (blue LED)
<1W
Preset Timing Mode (pre-adjusted to VESA
®
1280 x 1024 @ 60 Hz)
Warning: Do not set the graphics card in your computer to exceed these refresh rates; doing so may result in
permanent damage to the LCD display.

Other manuals for ViewSonic VA926G

Related product manuals