ViewSonic VE150m/VE150mb 12
Troubleshooting
No power
• Make sure power button (or switch) is ON.
• Make sure A/C power cord is securely connected to the DC power supply
and the power supply is firmly connected to the LCD display.
• Plug another electrical device (like a radio) into the power outlet to verify that
the outlet is supplying proper voltage.
Power on but no screen image
• Make sure the video cable supplied with the LCD display is tightly secured to
the video output port on the back of the computer. If the other end of the
video cable is not attached permanently to the LCD display, tightly secure it
to the LCD display.
• Adjust brightness and contrast.
• If you are using an Macintosh older than G3, you need a Macintosh adapter.
Wrong or abnormal colors
• If any colors (red, green, or blue) are missing, check the video cable to make
sure it is securely connected. Loose or broken pins in the cable connector
could cause an improper connection.
• Connect the LCD display to another computer.
• If you have an older graphics card, contact ViewSonic
®
for a non-DDC
adapter.
Control buttons do not work
• Make sure OSD is not locked. Refer to “OSD and Power Lock Settings” on
page 5.
• Press only one button at a time.
To Next Page
Loading...
