ViewSonic VFM1024w-11 Firmware Upgrade Guide

2. Firmware Upgrade Procedures
1. Check the current firmware version of the Digital Photo Frame
before upgrading.
2. Copy the file to an empty SD card, then rename to “upgrade.img”
3. Make sure the Digital Photo Frame is OFF.
4. Insert the SD card with the “upgraded.img” file into the Digital
Photo frame.
5. It will upgrade firmware automatically after switch on the Digital
Photo Frame.
6. It will appear Successful or OK on the screen after completed
properly.
7. Restart the Digital Photo Frame.
ViewSonic Corporation Confidential - Do Not Copy VFM1024W-11M
7

ViewSonic VFM1024w-11 Specifications

General

Resolution	1024 x 600 pixels
Aspect Ratio	16:9
Contrast Ratio	300:1
Built-in Memory	512 MB
USB Port	USB 2.0
Video Playback	No
Audio Playback	No
Brightness	200 cd/m²
Supported Media Formats	JPEG
Memory Card Support	SD, SDHC
Power Supply	AC adapter