ViewSonic VG2030M User Manual

ViewSonic VG2030m 7
Wall Mounting (Optional)
To obtain a wall-mounting kit, contact ViewSonic
®
or your local dealer. Refer to the
instructions that come with the base mounting kit. To convert your LCD display from a desk-
mounted to a wall-mounted display, do the following:
1. Verify that the Power button is turned Off, then
disconnect the power cord.
2. Lay the LCD display face down on a towel or
blanket.
3. Remove the Plastic Covers from the back of the
LCD display.
4. Remove the four screws attaching the base.
5. Remove the Rubber Plugs from inside the four
VESA screw holes.
6. Attach the mounting bracket from the VESA
compatible wall mounting kit (75 mm x 75 mm
distance).
7. Attach the LCD display to the wall, following the
instructions in the wall-mounting kit.
To Raise and Lower the display
You can easily raise and lower the display panel (the head) manually. As you face the front of
the display, take hold of each side of the head and pull up or down. The panel should move
easily.
Four VESA screw holes

ViewSonic VG2030M Specifications

General

Brand	ViewSonic
Model	VG2030M
Category	Monitor
Language	English