Name: ViewSonic VMP75
Brand: ViewSonic
Rating: 4 (1 reviews)

VMP75 Firmware Updater Instructions



WARNING!

Duringthefirmwareupgradeprocesses,pleaseDONOTREMOVEYOURUSB

MEMORYDEVICE,DONOTPRESSANYBUTTONONTHEVMP75,DONOTPRESS

ANYBUTTONONTHEVMP75REMOTECONTROL,andDONOTPOWEROFFTHE

VMP75.



1. ClickontheVMP75firmwarefiletodownloadat

http://www.viewsonic.com/support/downloads/drivers/?prod_name=vmp75

2. OntheFileDownloadMenu–“Doyouwanttoopenorsavethisfile?”,selectthe

“Save”option.

3. OntheSaveAsMenu,clickonthe“Savein:”drop‐downmenulistandselect

“Desktop”asyourdestinationfolder.

4. AftertheInternetdownloadiscompleted,clickon“Close”ontheDownload

CompleteMenuandclickonthe“X”onthemenubarontheupper‐rightcornerto

exittheInternetbrowser.

5. InsertaremovableUSBmemorydeviceontoanyavailableUSBportonyour

computer.

6. DoubleclickontheVMP75firmwarefilethatyouhaddownloadedontheDesktop

andextractboththe“upgrade.bin”and“Checksum.txt”filesontoyourremovable

USBmemorydevice.

7. Afterbothfileshasbeenextractedsuccessfully,clickonthe“SavelyRemove

Hardware”Icon(greenarrow)onthetaskbar,thelower‐rightcorner,andselect

“SafelyremoveUSBMassStorageDevice”.

8. RemoveyourUSBmemorydevicefromthecomputerafterthe“TheUSBMass

StorageDevicecannowbesafelyremovedfromthesystem”messageappeared.

9. InsertyourUSBmemorydeviceontotheVMP75USBportandpowerontheVMP75

ifithasnotalreadybeenon.

10. Pressthe“SETUP”buttonontheVMP75remotecontroltoaccesstheSetupMain

Menu.

11. Scrolldown,hilight“Version”,andpress“OK”ontheVMP75remotecontrolto

selecttheVersionMenu.

12. Select“FirmwareUpgrade”ontheVersionMenu.

13. Select“USBUpgrade”ontheFirmwareUpgradeMenu.

14. WhentheFirmwareUpgradeWizardfoundthefirmwarefileandasks“Doyouwant

toupgradenow?”,presstheleft‐arrowbuttonontheVMP75remotetohilight“Yes”

(blue)andpress“OK”toconfirm.

15. RemoveyourUSBmemorydevicefromtheVMP75aftertheVMP75hassuccessfuly

downloadedthefirmwareandrebootitself.

Other manuals for ViewSonic VMP75

Questions and Answers:

Need help?

Do you have a question about the ViewSonic VMP75 and is the answer not in the manual?

General