Assembly (Dis-Assy) Procedure
For
VIEWSONIC VP2290b MONITOR
DIS-ASSEMBLY
15A
15
Situate LCD module onto foam cushion (Item 15) to protect underlying PCBs. Install protective
mylar film onto front polarizer (Item 15A).
16
If LCD module (IPN F8991) is to be transported to another work area, use carrier (Item 16).
If LCD module is to be disassembled at same work bench, refer to “Assembly (Dis-Assy)
Procedure for VIEWSONIC F8991 MODULE” document.
Page 11
ViewSonic Corporation
Confidential – Do Not Copy
To Next Page
Loading...
