49
Eco Mode
Allows users to choose between various modes, based on power
consumption.
DDC/CI (Display Data Channel Command Interface)
Activating this setting allows monitor control via the graphics card.
4-4. OSD and Power Lock Settings
• OSD Lock: Press and hold [2] and [3] for 10 seconds. If any other
buttons are pressed the message OSD Locked will display for 3
seconds.
• OSD Unlock: Press and hold [2] and [3] again for 10 seconds.
• Power Button Lock: Press and hold [2] and [4] for 10 seconds.
• If the power button is pressed the message Power Button Locked
will display for 3 seconds.
• With or without this setting, after a power failure, your display’s
power will automatically turn ON when power is restored.
• Power Button Unlock: Press and hold [2] and [4] again for 10
seconds.
To Next Page
Loading...