ViewSonic VS19494 User Manual

IFP33 Series
Commercial Touch Display
User Guide
Model No. VS19493 | VS19494 | VS19495
P/N: IFP6533 | IFP7533 | IFP8633
IMPORTANT: Please read this User Guide to obtain important information on installing and using your product in
a safe manner, as well as registering your product for future service. Warranty information contained in this User
Guide will describe your limited coverage from ViewSonic® Corporation, which is also found on our web site at
http://www.viewsonic.com in English, or in specific languages using the Regional selection box of our website.

ViewSonic VS19494 Specifications

General

Brand	ViewSonic
Model	VS19494
Category	Touchscreen
Language	English

Summary

Safety Precautions

Introduction and Product Overview

Control Panel and Front I/O

Details the function of front panel buttons and ports.

I/O Panel

Illustrates and describes all rear panel connectors and ports.

Remote Control

Explains the functions of buttons on the remote control.

Making Connections

Connecting External Devices and Touch Connection

How to connect various external devices and establish touch functionality.

Using Your ViewBoard

Powering On/Off your ViewBoard

Step-by-step guide for turning the device on and off.

Initial Launch Setup

Guides through the first-time setup wizard upon startup.

Toolbar

Control Bar

On-Screen Display (OSD) Menu - General Settings

Input Settings

How to select input sources and adjust display brightness.

Display Settings

How to adjust various display parameters like brightness, contrast, etc.

Audio Settings

How to adjust audio modes, volume, bass, treble, and balance.

Settings - Embedded Player

Network & Internet

Manages Wi-Fi, Ethernet, Bluetooth, VPN, and Hotspot settings.

Wi-Fi

Ethernet

Wireless Hotspot

Bluetooth

RS-232 Protocol

RS-232 Hardware Specification

Details connector types and pin assignments for RS-232.

LAN Hardware Specification

Details connector types and pin assignments for LAN.

RS232 Communication Setting

Specifies baud rate, data bits, parity, and stop bits.

LAN Communication Setting

Command Message Reference

Set-Function Listing

Commands for controlling display functions via RS-232.

Get-Function Listing

Commands to retrieve display information via RS-232.

Appendix

Specifications

Troubleshooting

Provides solutions for common user issues and problems.