S
Stacy CooperSep 18, 2025
Why does the screen appear yellow on my ViewSonic VS19535?
- TTimothy CastilloSep 18, 2025
If the screen on your ViewSonic monitor appears yellow, make sure the “Blue Light Filter” is turned Off.
To Next PageTo Next PageWhy does the screen appear yellow on my ViewSonic VS19535?
If the screen on your ViewSonic monitor appears yellow, make sure the “Blue Light Filter” is turned Off.
Why is there power on, but no image on my ViewSonic Monitor?
If your ViewSonic Monitor has power but no image, ensure the video cable connecting the monitor to the computer is properly and securely connected. Also, adjust the brightness and contrast settings. Finally, make sure the correct input source is selected.
What to do if an external device is connected, but no image appears on the ViewSonic VS19535 screen?
If the external device is connected, but no image appears on the screen of your ViewSonic monitor, make sure the power is on. Adjust brightness and contrast via the OSD Menu. Check the connecting cable and make sure it is properly and securely connected, as loose or broken pins in the cable connector could cause an improper connection.
How to fix a blurred screen image on a ViewSonic Monitor?
To fix a blurred screen image on your ViewSonic Monitor, adjust the resolution to the correct Aspect Ratio. Alternatively, reset the monitor to factory settings.
How to troubleshoot no audio output on ViewSonic VS19535 Monitor?
If you are experiencing no audio output from your ViewSonic monitor, and you're using headphones, ensure the mini stereo jack is properly connected. Make sure the volume is not muted or set to 0. Check the Audio Input setting as well.
Why USB devices connected to ViewSonic monitor do not work?
If USB devices connected to the ViewSonic monitor do not work, make sure the USB cable is connected properly. Try changing to another USB port, if applicable. If some USB devices require a higher electric current, connect the device directly to the computer.
What to do if control panel keys do not work on my ViewSonic Monitor?
If the control panel keys do not work on your ViewSonic Monitor, press only one key at a time. If the issue persists, restart the computer.
Why are some menus not selectable in the OSD on my ViewSonic VS19535?
If some menus aren’t selectable in the OSD on your ViewSonic Monitor, adjust the ViewMode or the input source. If that doesn't work, reset the monitor to factory settings.
How to fix a blurred screen image on ViewSonic VS19535?
If the screen image on your ViewSonic monitor is blurred, adjust the resolution to the correct Aspect Ratio. If the issue persists, reset the monitor to factory settings.
Why will my ViewSonic VS19535 not adjust?
If your ViewSonic Monitor will not adjust, make sure there are no obstructions near or on the monitor, and that there is adequate spacing.
General| Screen Size | 19 inches |
|---|---|
| Resolution | 1366 x 768 |
| Panel Type | TN |
| Aspect Ratio | 16:9 |
| Brightness | 250 cd/m² |
| Contrast Ratio | 1000:1 |
| Response Time | 5 ms |
| Connectivity | VGA |
| Viewing Angle | 90° (H) / 65° (V) |
| Input Connectors | VGA |
| Power Consumption | 18W |
