ViewSonic VT2755LED - Page 35

26
ViewSonic VT2755LED
ENGLISH
Using the TV Features
Adjusting the Settings
1. Press the MENU button to display the OSD main menu. There are six top menus on the screen:
PICTURE, AUDIO, TIME, OPTION, LOCK, and CHANNEL. (CHANNEL menu can only be
enabled in TV source.)
2. Press ◄ or ► to select your desired top menu.
3. Press ENTER or ▼ to enter the menu you select.
4. Use ▲▼ to select the control you want to adjust.
5. When selecting the control with ►, press ► to enter next level menu or enable the function.
(► will only appear when the control is highlighted)
6. Press ◄► to adjust or select the settings.
7. Press MENU to exit from the OSD menu.
Picture menu
Function Description
Picture Mode To select picture mode.
Contrast To adjust contrast of video.
Brightness To adjust luminance of video.
Sharpness
To adjust picture sharpness.
Tint To adjust tint level.(Except PC source)
Color To adjust color.(Except PC source)
Color Mode To select and adjust color mode.
Aspect Ratio
To select image size between Normal, Movie Scale,
Zoom in and 4:3.(Except PC and USB source)
Noise
Reduction
To reduce the noise level of connected equipment.
(Except PC and USB source)
Advanced
To ne tune the image.(Only enabled in PC source)
* H-Pos: To adjust the horizontal position of the
picture.
* V-Pos: To adjust the vertical position of the picture.
* Clock: To adjust delay time of clock in order to
reduce the noise of picture.
* Phase: To adjust delay time of phase in order to
reduce the noise of picture.
* Auto: To auto adjust picture’s horizontal position,
vertical position, clock, phase, ne tune and H-Size.