ViewSonic VT2755LED - Page 46

Other Information
37
ViewSonic VT2755LED
ENGLISH
Reply (Command Type= “+” or “-”)
Name Length ID Command
Type
CR
Byte Count 1 Byte 2 Byte 1 Byte 1 Byte
Bytes order 1 2~3 4 5
[NOTE] The reply for “Power on” command is the exception. It’s 0x322B0D ( 2+<CR>).
(Command Type= “+” or “-”, Only for HDTV power on)
Name Length Command
Type
CR
Byte Count 1 Byte 1 Byte 1 Byte
Bytes order 1 2 3
Example1: Set HDTV power on and this command is valid.
Send (Hex Format)
Name Length
Command
Type
Command Value1
Value2 Value3
CR
Hex 0x36 0x73 0x21 0x30 0x30 0x31 0x0D
Reply (Hex Format)
Name
Length Command
Type
CR
Hex 0x32 0x2B 0x0D
Example2: Set Brightness as 76 for TV-02 and this command is valid.
Send (Hex Format)
Name Length
ID
Command
Type
Command
Value1 Value2
Value3
CR
Hex
0x38 0x30
0x32
0x73
0x24 0x30
0x37 0x36
0x0D
Reply (Hex Format)
Name Length ID Command
Type
CR
Hex 0x34 0x30
0x32
0x2B 0x0D