ViewSonic VX2453mh-LED User Manual

ViewSonic VX2453mh-LED 9
Do the following to adjust the display setting:
1. To display the Main Menu, press button [1].
NOTE: All OSD menus and adjustment screens disappear automatically after about 15
seconds. This is adjustable through the OSD timeout setting in the setup menu.
2. To select a control to adjust, pressSorTto scroll up or down in the Main Menu.
3. After the desired control is selected, press button [2]. A control screen like the one shown
below appears.
4. To adjust the control, press the up S or down T buttons.
5. To save the adjustments and exit the menu, press button [1] twice.
The following tips may help you optimize your display:
• Adjust the computer's graphics card so that it outputs a 1920 x 1080 @ 60Hz video signal to
the LCD display. (Look for instructions on “changing the refresh rate” in the graphics card's
user guide.)
• If necessary, make small adjustments using H. POSITION and V. POSITION until the
screen image is completely visible
. (The black border around the edge of the screen should
barely touch the illuminated “active area” of the LCD display.)
The line at the bottom of the screen shows
the current functions of buttons 1 and 2:
Exit or select the control.

ViewSonic VX2453mh-LED Specifications

General

3D	-
Pixel pitch	0.2715 x 0.2715 mm
Aspect ratio	16:9
Response time	2 ms
Display diagonal	23.6 \
Separate H/V sync	Yes
Supported video modes	1080p
Viewing angle, vertical	160 °
Contrast ratio (dynamic)	30000000:1
Contrast ratio (typical)	1000:1
Display number of colors	16.78 million colors
Viewing angle, horizontal	170 °
Digital vertical frequency	50 - 75 Hz
Digital horizontal frequency	24 - 82 kHz
Display brightness (typical)	300 cd/m²
Supported graphics resolutions	1920 x 1080 (HD 1080)
USB Type-A downstream ports quantity	0
RMS rated power	4 W
Certification	BSMI, CCC, China Energy, PSB, C-Tick, KCC, CE, CB, GostR/Hygienic, Ukraine, UL/cUL, FCC-B, ICES-B, ENERGY STAR 5.0, EPEAT Silver, WEEE, RoHS
Product color	Black
LED indicators	Power
Tilt angle range	-5 - 20 °
Panel mounting interface	- mm
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (max)	34 W
Power consumption (standby)	0.5 W
Power consumption (typical)	23 W
Power consumption (PowerSave)	16 W
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 90 %
Sustainability certificates	EPEAT Silver, ENERGY STAR

Weight and Dimensions

Depth (with stand)	196 mm
Height (with stand)	429 mm
Weight (with stand)	4110 g
Width (without stand)	573 mm
Weight (without stand)	- g