ViewSonic VX3218-PC-mhd - Page 31

31
1
1ms Mode <MPRT>
Choose whether to acvate Moving Picture Response Time (MPRT); default
seng is O.
NOTE:
1. Make sure Input Timing detecon is >100Hz to turn on 1ms Mode
from default.
2. If 1ms Mode is set to “On”, when turning on Adapve Sync, MPRT
will automacally turn o.
3. When 1ms Mode is set to “On”, the following funcons will be
grayed out and disabled: Brightness, Advanced DCR, ECO Mode,
sRGB, Response Time, and DDC/CI Brightness adjustment.
4. sRGB and 1ms Mode will disable each other.
5. The IC controls Moving Picture Response Time, so the overall
Brightness will be dark.