Vifa Reykjavik - User Manual

2
1
The Bluetooth
®
word mark and logos are registered trademarks owned by Bluetooth SIG, Inc.,
and any use of such marks by Vifa Denmark A/S is under license. Other trademarks and trade
names are those of their respective owners.
Qualcomm is a trademark of Qualcomm Incorporated, registered in the United States and other
countries. aptX is a trademark of Qualcomm Technologies International, Ltd., registered in the
United States and other countries.
The maximum ambient temperature should not exceed 40°C. Vifa Denmark
A/S hereby declares that the product Reykjavik (VIFA070), which contains
Bluetooth radio transceiver, is in compliance with EU directive
2014/53/EU (RED). The radiated power for RF frequency
range 2402-2480MHz is less than 10dBm.
The complete EU Declaration of Conformity can be
from: www.vifa.dk/support Firmware version:
Equal or later than version 4.2
LINK TWO REYKJAVIK SPEAKERS LINK TWO REYKJAVIK SPEAKERS REGISTER AND TRADEMARKS SPECIFICATIONS SPECIFICATIONS SUPPORT
Portable wireless loudspeaker
Bluetooth
®
Wireless Technology
Qualcomm
®
aptX™ audio
AUX 3.5 mm mini jack
USB playback
Lithium Ion battery
DSP crossover, optimized
for low distortionand high
precision
3 channel digital amplier
LINK two speakers
Speaker phone
(Incl noise/echo cancelling)
Bluetooth
®
Wireless Technology
Qualcomm
®
aptX™ audio
AUX 3.5 mm mini‐jack
USB-C
2 X 19 mm Vifa drive units
with coated fabric dome
and neodymium magnet
70 mm Vifa drive unit with
aluminum cone and neodymium
magnet
62 Hz – 20 kHz @ +/- 3 dB
USB, 5V.
After 3 minutes without signal
After 30 minutes without signal
Lithium-Ion 19Wh
65 mm / 139 mm
0.6 kg
Custom made Kvadrat textile,
anodized aluminum
Description
Technical features
Inputs
Tweeter
Woofer
Frequency response
Input voltage
Sleep mode
Automatic off
Battery, internal
Height/Diameter
Net weight
Grilles
Support
If you experience issues that are not described
in this quick-guide, please refer to
vifa.dk/support for more information
Register your Reykjavik
We encourage you to register your speaker at
vifa.dk/support
2018 09 Rev. 3.2
IN THE BOX
USB-C cable
Safety instructions
and warranty
Quick guide
1x Reykjavik + Travel bag
Make sure the two Reykjavik
speakers are turned ON.
Briey press the Link button on
one speaker (primary) until Link
indicator ashes YELLOW.
Repeat on the other speaker
(secondary).
When both speakers are linked,
their Link indicators become
solid YELLOW, showing they are
linked as stereo speakers.
*When the secondary speaker is
linked, it plays primary speaker’s
music.
To change to Left/Right channel,
briey press Link button. To break the
Link, press and hold Link button.
REYKJAVIK
Quick guide
Model: VIFA070

Summary

Vifa Reykjavik Quick Guide Introduction

Vifa Reykjavik - Whats Included

Linking Two Vifa Reykjavik Speakers

Step 1: Initiate Speaker Linking

Ensure speakers are ON. Press Link button on one speaker until its indicator flashes YELLOW.

Step 2: Confirm Stereo Connection

Link indicators turn solid YELLOW. Adjust channel or break link by pressing and holding the Link button.

Vifa Reykjavik Buttons and Indicators

Button Functions Overview

Details on Answer/Terminate call, Mute/Pause, MODE, and Volume controls.

Link Status Indicators Explained

Understanding indicator lights for Stereo, Left channel, and Right channel linkage.

Vifa Reykjavik Battery Charging

Charging Process and Level Indicators

Instructions for charging via USB-C and interpreting battery status lights.

Connecting Vifa Reykjavik via Bluetooth

Initiate Bluetooth Pairing Mode

Turn on speaker and hold MODE button until status indicator flashes WHITE, then BLUE for pairing.

Connect to Bluetooth Device

Enable Bluetooth on your device, select VIFA_REYxxxxxx, and confirm connection.

Wired Connection for Vifa Reykjavik

Step 1 & 2: Connect Audio Source

Turn on speaker and connect your device using the USB-C or AUX cable.

Step 3: Confirm Wired Playback

Status indicator turns solid GREEN for wired audio. Mute/Unmute music using the Mute/Pause button.

Using the Vifa Reykjavik Speakerphone

Answering and Ending Calls

How to receive incoming calls (flashing GREEN indicator) and terminate calls.

Call Management Features

Instructions for rejecting incoming calls and muting/unmuting the microphone.

Vifa Reykjavik Technical Specifications

General and Input Specifications

Details on speaker type, Bluetooth, AUX, USB, and input requirements.

Performance and Component Details

Information on drivers, frequency response, power, battery, dimensions, and materials.

Vifa Reykjavik Support and Registration

Troubleshooting Resources

Refer to vifa.dk/support for advanced troubleshooting not covered in this guide.

Register Your Speaker

Encouragement to register your Reykjavik speaker online for support and updates.

Vifa Reykjavik Trademarks and Compliance

Regulatory Information and Certifications

Details on Bluetooth, Qualcomm, CE marking, and EU conformity declaration.

Vifa Reykjavik Specifications

General

Tweeter	Yes
Magnet type	Neodymium
Driver diameter	19 mm
Woofer diameter	70 mm
Number of drivers	3
Number of speakers	1
Audio output channels	- channels
Frequency range	62 - 20000 Hz
RMS rated power	- W
Wi-Fi	No
USB connector type	USB Type-C
Connectivity technology	Wireless
Product type	Mono portable speaker
Product color	Blue
Product design	Spheric
Volume control	Touch
Housing material	Aluminum
International Protection (IP) code	IPX4
Recommended usage	Universal
Amplifier class	D
Battery type	Built-in battery
Power source type	Battery
Quantity per pack	1 pc(s)

Weight and Dimensions

Width	139 mm
Height	65 mm
Weight	600 g