MODEL VG06041 4
WARNING
WE STRONGLY RECOMMEND THAT A LICENSED PLUMBER INSTALL THIS STANDING SHOWER
CABIN AND INCLUDE THE ASSISTANCE OF A SECOND PERSON TO INSTALL THE DOOR UNIT.
INSTALLATION OF THE SHOWER DOORS BY AN INEXPERIENCED PERSON MAY RESULT IN
GLASS BREAKAGE AND, CONSEQUENTLY, CAUSE PERSONAL INJURY OR DEATH.
BEFORE STARTING
Compare items on your invoice with what you have received. Carefully review the Packing List on page 2.
If any item is missing, please call Vigo Industries at 1-866-591-7792.
REQUIRED TOOLS
o Square and/or Phillips #1 and #2 screwdriver
o Flat head screwdriver
o Electric drill plus a 1/8”, 3/16”, or 7/32” drill bit (depending on wall)
o Level
o Measuring Tape
o Pencil (non-permanent; HB)
o Clear silicone caulking
o Utility knife
WARNING
• Handle fragile items with care to prevent personal injury or material damage.
• Glass on panels and doors is tempered glass and must never be cut to prevent personal injury.
IMPORTANT
• Fiberglass or acrylic construction might not be sufficiently strong enough to support the shower door
enclosure. You should use the wood framing from behind the face edge of the stall to provide a secure
mounting to the door. Apply a bead of silicone between the walls and base of the stall.
• For optimum performance, you should install the shower door perfectly level on a level surface.
MODEL VG06041 HAS A REVERSIBLE DOOR AND CAN THEREFORE BE INSTALLED TO EITHER
THE RIGHT OR LEFT SIDE (SEE CONFIGURATION DIAGRAM BELOW)
To Next Page
Loading...