Do you have a question about the VIGOUR derby AQUAWASH and is the answer not in the manual?
Defines approved uses and prohibits other types of use for the shower toilet.
Manual reflects product status; technical modifications are reserved.
Precautions on faulty units, power sources, hoses, and unauthorized repairs.
Crucial instructions for handling batteries, including risks of swallowing and leakage.
Explains soft-close mechanism and warns against manual force; notes seat weight capacity.
Outlines manual importance, copyright, and limitations of liability.
Introduces the remote control as the operating device and mentions its wall-mounting bracket.
Details remote buttons, welcome mode activation, and standby mode entry/exit.
Explains battery status indication and provides instructions for replacement.
Covers general use, rear wash, and lady wash functions with start/stop instructions.
Details how to adjust water temperature, flow rate, and spray arm position.
Explains how to manage signal tones and reset unit settings to factory defaults.
Instructions for placing the shower toilet into standby mode and how to exit it.
Step-by-step guide on extending and gently cleaning the spray arm.
Details the procedure for descaling the entire water system using liquid descaler.
Guides users on setting the descaling interval according to local water hardness.
Explains the visual and audible alerts indicating when descaling is due.
Provides regular, weekly/monthly, and quarterly cleaning advice for the shower toilet.
Instructions for cleaning remote and ceramic surfaces, advising against harsh cleaners.
Tips for cleaning the toilet lid and seat, including preventing mineral stains.
Step-by-step guides for removing and refitting the toilet lid and seat.
Critical safety warning against opening the unit or making modifications.
Addresses issues where the unit is not functioning, including causes and solutions.
Solves problems related to water spray, temperature, flow rate, and spray arm movement.
Addresses issues where the remote control is not working, primarily battery-related.
Covers material compliance and proper disposal of old units and batteries.
Informs users on how to obtain the product's Declaration of Conformity.