Need help?Do you have a question about the Viking spas Viking 1P 120v and is the answer not in the manual?
General| Brand | Viking spas |
|---|---|
| Model | Viking 1P 120v |
| Category | Hot Tub |
| Language | English |
Critical warnings on supervision, electrical safety, drowning prevention, and health considerations.
Guidelines for safe spa use, including supervision, entry/exit caution, and time limits.
Guidelines for spa placement on a firm, level surface and appropriate pad selection.
Standards for deck and balcony construction to support spa weight and meet local codes.
Overview of GFCI ratings, permanent connection, and customer responsibilities for hookup.
Visual guide for connecting a 220-volt spa system, showing wire placement.
Detailed diagram for GFCI breaker box installation for 220V spa wiring.
General electrical notices, wiring codes, conduit requirements, and material use.
Instructions for locating and routing the GFCI cord for plug and play spas.
Information on operating various topside control panels and optional touchscreen controllers.
How to adjust waterfall flow and operate spa jets, including specific jet types.
Explanation of the LED lighting feature, colors, and control sequences.
Details on operating Turbo and Volcano jets, including operational notes.
How to adjust air controls for mixing air with water into jets.
Locating operating instructions for stereo and Vibrosonic jet systems.
Step-by-step guide for filling the spa with water and checking for leaks.
Procedures for initial startup, filter handling, and adding start-up chemicals.
Instructions for draining spa water, including drain locations and steps.
Recommended cleaning for spa surfaces and maintenance for spa pillows.
Steps for preparing the spa for extended periods of non-use to prevent freeze damage.
Instructions for cleaning and replacing spa filters for different models.
Maintenance for spa cabinet, cover, and recommended ozonator settings.
Table listing water capacity in gallons for various Viking spa models.
Troubleshooting steps for heating issues, focusing on air locks and water flow.
Solutions for pump operational issues, checking gate valves and water level.
To Next Page