23c
1. Turn Jump Starter's
Clamp Power Switch OFF.
2. Turn Vehicle's Ignition OFF.
OFFOFF
ON
ON
57085
WARNING
To prevent serious injury:
1. Do not touch positive and negative
battery clamps together.
2. Do not connect to the negative
terminal of the battery.
3. Read manual before
set up and/or use.
AFTER VEHICLE STARTS
1. Turn Jump Starter's
Clamp Power Switch OFF.
2. Remove Black Negative Clamp.
3. Remove Red Positive Clamp.
4. Recharge Jump Starter
immediately.
3. Connect Red Positive Clamp,
then connect Black Negative
Clamp to a non-moving
metal part of the vehicle.
+
_
Grounded
Metal
To Next Page
Need help?
General
