Viking DDFF136SS - Important Safety Instructions; General Safety Precautions; Hazard Identification

2
Required Components
Remove and discard screw and hinge cover.
(Repeat if two hinges are used.)
Remove and discard plug button from hole on
non-hinge side.
Remove three screws from mullion area opposite the
center hinge.
Install set screws from bag into holes from
previous step.
Remove edge of corner cover.
Left Panel Right Panel
Top Panel
Front Grille
Caps
Screws
Set
Screws
A
B
Bottom Mount Model Only
2
Bottom Mount Model Only
4
5
Installation
1
Bottom Mount Model Only
3