To Next PageTo Next PageWhat causes the oven to not reach elevated clean temperatures in self-clean mode on Viking Cookers?
If your Viking Cookers is in self-clean mode and heats, but doesn't reach elevated clean temperatures, the oven sensor might be out of calibration. Replace the RTD Sensor. Alternatively, the control board may be the problem; replace the control board.
What to do if oven door won’t unlock on Viking Cookers?
If the oven door won’t unlock on your Viking Cookers and the oven is below elevated clean temperatures, it could be due to an open door latch motor; replace the door latch motor. Another possible cause is the oven sensor being out of calibration; ohm the oven sensor. The control board could also be the issue; replace the control board. An open relay may also be the cause; repair or replace defective wiring. Defective oven wiring may cause the problem.
What to do if broil element is inoperable on Viking Cookers?
If the broil element in your Viking Cookers isn't working, it could be caused by defective oven wiring; repair or replace the wiring. The broil element itself might be the issue; test the broil element. The oven control board could also be the problem; verify relay operation, wiring, and inputs.
How to fix a bake element inoperable on Viking Cookers?
If the bake element in your Viking Cookers is not working, it could be due to defective oven wiring; repair or replace the wiring. Another potential cause is the bake element itself; test the bake element. The oven control board could also be the issue; verify relay operation, wiring, and inputs.
Why are the oven lights inoperable in my Viking Cookers?
If the oven lights in your Viking Cookers are not working, it could be due to defective oven wiring; repair or replace the wiring. The light bulb itself might be the issue; replace the light bulb. Alternatively, the light switch may be faulty; test the light switch. Finally, the door switch could be defective; test the door switch.
How to troubleshoot a convection fan inoperable on Viking Cookers?
If the convection fan in your Viking Cookers is not working, it could be due to defective oven wiring; repair or replace any defective wiring. Another potential cause is the convection fan motor itself; test the convection fan motor. The oven control board could also be the issue; verify relay operation, wiring, and inputs. Finally, defective capacitors may cause the problem.
How to fix surface burner igniter inoperable on Viking VDSC530T?
If the surface burner igniter on your Viking Cookers isn't sparking, it could be due to debris or soil on the igniter. Clean the igniter to remove any debris. Another possible cause is the igniter wire itself; in this case, repair or replace the wire. It could also be a single point spark module. Test the module.
This symbol alerts personnel to hazards that can kill or hurt you and others.
Details on one-year, five-year, ten-year, and ninety-day warranties for range components.
Procedure for obtaining authorized service and warranty claim information.
Technical details and dimensions for the 30" Electronic Control Dual Fuel Range.
General safety warnings for operation, cleaning, and potential hazards.
Information on electrical, gas connection, and installation requirements.
Explanation of how to identify the appliance's model and serial number.
Description of the control panel layout, displays, buttons, and basic functions.
Guide on selecting oven modes and adjusting temperatures for various cooking cycles.
Detailed charts showing element usage for Bake, Convection, Broil, and other cycles.
Instructions for cleaning surface burners, control panel, and oven interior.
Procedures for testing components via the control board, including relays and elements.
Step-by-step guides for accessing and replacing parts like the landing ledge, oven light, and elements.
Common problems, probable causes, and suggested corrections for appliance malfunctions.
Diagrams showing electrical paths for convection fan operation at different speeds.
Schematics detailing electrical connections to and from the main control board.
General