EasyManua.ls Logo

Viking VFP12 - Troubleshooting and Care; Resolving Operational Issues; Cleaning and Maintenance Guide

Viking VFP12
17 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
TROUBLESHOOTING
• The motor will automatically shut off if machine is over loaded or
run too long. If this occurs allow the machine to cool for
approximately 30 minutes.
• All accessories must be locked in correctly for appliance to be
switched on. If appliance does not come on, remove lid and bowl
and relock into place.
CLEANING AND SERVICE
• Always switch off and unplug before cleaning.
• Handle blades and discs with extreme care, as they are extremely
sharp.
• Store the discs in the storage box provided with the food processor.
• Some foods may discolor the plastic. This is perfectly normal and will
not harm the plastic nor affect the flavor of the food. Rub with a
cloth dipped in vegetable oil to remove discoloration.
Power Unit
• Wipe with a damp cloth and dry. Make sure the interlock area is clear
of food debris.
• Store cord in the storage area provided.
Stainless Steel Whip
• Detach the beaters from the drive head by gently pulling them free.
Wash in warm soapy water.
• Wipe the drive head with a damp cloth then dry. Do not immerse
the drive head in water.
All other parts
• Wash by hand, and then dry.
• Alternatively they may be washed on the top rack of your dishwasher.
7
Use & Care (food processor)3 8/25/04 9:29 AM Page 7