To Next PageTo Next PageWhy won't my Viking VGBQ300-2RT Grill light?
If your Viking grill isn't lighting when you press the ignition switch, make sure the gas is turned on and available, the control knob isn't set to off, the battery is good, and gas is flowing from the valve.
What to do if Viking VGBQ300-2RT Grill burner won't light?
If the burner on your Viking grill won't light, check the igniter for continuity and cracks, ensure there's no debris in the ports, and verify there's a spark at the thermocouple.
Why is my Viking VGBQ300-2RT Grill rotisserie not working?
If the rotisserie on your Viking grill isn't working, check that the electrical cord is securely connected, the circuit breaker hasn't tripped (or fuse blown), and power is available.
How to fix yellow flame on Viking Grill?
If the burner flame on your Viking grill is yellow or orange and there's a gas odor, check the burner inlet air shutter for obstructions and ensure it's properly adjusted.
Why Viking Grill burner lights but won't stay lit?
If the burner on your Viking grill lights but doesn't stay lit after releasing the button, verify the thermocouple isn't kinked, hold the button until the burner remains lit, and check the infrared screen for black spots.
Essential safety messages, symbols, and definitions for hazards like DANGER, WARNING, and CAUTION.
Details one-year full, five-year limited, lifetime limited, and 90-day residential plus warranty coverage.
Explains procedures for warranty service, dealer contact, and proof of purchase requirements.
Technical details for 30" and 41" T-Series grills, including dimensions, gas/electrical, and burner ratings.
Technical details for 53" T-Series grills, including dimensions, gas/electrical, and burner ratings.
Crucial warnings covering fire, shock, chemical exposure, improper usage, and environmental hazards.
Guide to finding and interpreting grill model and serial numbers.
Essential checks and preparations before lighting the grill, including gas supply and hose inspection.
Step-by-step guide for lighting various grill burners using electronic ignition and manual methods.
Information on canopy thermometers, smoker box, wood chip usage, and rotisserie burner operation.
Diagrams illustrating control panel configurations for different Viking grill models.
Labeled diagram showing components behind the control access panel.
Labeled diagram showing components accessible from the rear access panel.
Steps to remove the control panel to access internal components like switches and modules.
Detailed procedures for testing the electronic ignition switch and ignition module.
Steps for diagnosing and testing igniters (standard, infrared, rotisserie) for spark issues.
Identifying burner locations and procedures for servicing side, grill, and rotisserie burners.
Tables for component testing (volts, ohms, amps) and a guide for common grill problems and solutions.
General
