EasyManua.ls Logo

Viking VS-12BL - Mounting, Care, and Safety; Mounting Instructions; Care and Maintenance; Important Safety Warning

Viking VS-12BL
4 pages
Print Icon
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
MOUNTING INSTRUCTIONS
It is recommended to bolt down the safe.
Note: The safe may be mounted to a wall or oor. Be aware of the load bearing. Failure to do so can result in
personal injury and/or damage to property. Use appropriate tools when performing work and always use eye
protection
• Wall Mounting
- Do not mount the safe without anchoring to the wall
- Find the studs in the wall, at your desired location. Most studs are
16 inches or 24 inches apart
- Check the wall for concealed wires or pipes
- Measure the location of the pre-set drill holes; mark their exact
position onto the wall ensuring that the studs or anything else behind
will not interfere
- Drill the appropriate size holes for the anchors you are using
- Carefully press the anchor into the holes at this time
- Mount the safe by running screws from inside of the safe and
securing to anchors; ensure the safe is mounted securely.
• Floor Mounting
- Use proper drill tools depending on the type of oor you are mounting the safe (wood, tile, or concrete)
- Measure the location of the pre-set drill holes; mark their exact position onto the oor
- Drill the appropriate size holes for the anchors you are using
- Carefully press the anchor into the holes at this time
- Mount the safe by running screws from inside of the safe and securing to anchors; ensure the safe is mounted
securely.
CARE AND MAINTENANCE
To maximize the security and performance of the safe, keep Glass Fingerprint Scanner F clean
• Use a dry cloth to remove any smudges or prints off the Fingerprint Scanner after use
• Use gentle cleaning agents to clean the safe and Glass Fingerprint Sacnner
• Test registered ngerprints and PIN code every 6 months
• Keep liquids away from the control panel. Spills on the control panel will cause damage and possibly electric shock
• Secure safe in a proper area to prevent from falling and causing damage or injury
• DO NOT disassemble the product. For all repairs, contact Viking Security Safe Customer Service
page 4/4
www.vikingsecuritysafe.com | vikingsecuritysafes@live.com | 650-539-9482
Mounting Holes
*Actual Model may vary
Viking Security Saf
e
WARNING
Never store rearms and ammunition together. The safest protection against accidents involving
children is to store your rearm unloaded in an approved Firearm Safety Lock Box, with ammunition
stored separately.