What to do if Villager Log Splitter does not work while motor running?
If your Villager Log Splitter isn't working even though the motor is running, here's what you should check: * Ensure the valve is opening by checking and tightening any loose connection parts. * Inspect the control levers and connection parts for any bending and repair if necessary. * Verify the hydraulic oil level and refill if it's low.
How to troubleshoot if my Villager Log Splitter motor does not start?
If the motor of your Villager Log Splitter doesn't start, consider these potential causes and solutions: 1. **No current in the socket:** Check the mains fuse and replace if necessary. 2. **Defective electrical extension line:** Unplug the extension line, check it for defects, and replace it if needed. 3. **Defective switch:** Have the switch checked by a qualified electrician.
Why does my Villager LS 7 T work with abnormal vibration and noise?
If your Villager Log Splitter is vibrating abnormally and making unusual noises, it might be due to a low hydraulic oil level. Check the oil level and refill as needed.
Learn the log splitter's application, limitations, and specific potential hazards.
Avoid operating the log splitter under the influence of substances affecting performance.
Operate on dry, solid, level ground; keep the work area clean and well-lit.
Check guards, remove tools, replace parts, and verify adequate oil level before operation.
Wear appropriate clothing; avoid loose items and use protective gear like gloves and footwear.
Always wear safety goggles to prevent eye damage from thrown foreign objects.
Use correctly rated extension cords (max 10m, min 2.5mm²) suitable for outdoor conditions.
Ensure proper circuit protection, grounding, and avoid contact with grounded surfaces.
Do not use open flames or smoke near the log splitter due to oil flammability.
Limit operation to one person and keep bystanders, children, and pets clear of the work area.
Ensure logs are cut square and branches flush; avoid logs containing nails, wire, or debris.
Maintain balance, avoid standing on the splitter, and keep hands away from moving parts.
Do not straddle or reach across the splitting area; keep hands clear of all moving parts.
Keep hands away from the machine when the ram is retracting and avoid splits/cracks in logs.
Operate within design limits; do not alter the splitter or split logs exceeding specifications.
Do not leave the log splitter running unattended; wait for it to stop completely.
Unplug the splitter before any adjustments, cleaning, or servicing operations.
Clean the unit after each use, lubricate moving parts, and inspect seals and hoses.
Dispose of used oil responsibly at authorized collection points; avoid environmental contamination.
Securely store the log splitter away from children and unauthorized individuals.
Ensure a fire extinguisher and first-aid kit are available and know emergency contact information.
Defines the operating temperature, altitude, and humidity limits for the log splitter.
Step-by-step guide for attaching the wheels to the log splitter base.
Instructions for unfolding and mounting the log support table onto the splitter.
Procedure for installing the control lever armguard and securing it properly.
Details on assembling the log holder retainers and securing the log clamps.
Guidance on moving the splitter to the work site and securing it for transport.
General| Brand | Villager |
|---|---|
| Model | LS 7 T |
| Category | Log Splitter |
| Language | English |
To Next Page