15
Never do maintenance or repairs with the unit running. Always do
maintenance and repairs on a cool unit. Disconnect the spark plug wire
to ensure the unit will not start.
MAINTENANCE SCHEDULE
The required maintenance procedures should be performed at the frequency
stated in the table. They should also be included as part of any seasonal tune-up.
Remove dirt and debris from the blower exterior.
Inspect the engine, tank, and hoses for possible leaks,
and repair as necessary.
Inspect the engine cooling fins for accumulation of dirt
or debris, and clean as necessary.
Inspect the entire machine for damage, loose or missing
components or fastenings, and repair as necessary.
Clean and re-oil the air filter.
Check spark plug condition and gap.
Inspect the entire machine and tubes for damage,
including loose or missing components, and repair as
necessary.
Check spark plug condition and gap.
Check fuel filter.
Clean the spark arrestor screen.