Villager VBV 230 E - Page 37

18
Villager
VBV 230 E (GB)
2. Start the engine and allow it to run until it stalls. This ensures that all the fuel has
been drained from the carburettor.
3. Allow the engine to cool.
4. Thoroughly clean the unit and inspect for any loose or damaged parts. Repair or
replace damaged parts and tighten loose screws, nuts or bolts. The unit is ready for
storage.
TRANSPORTING
 Allow the engine to cool before transporting.
 Secure the unit while transporting.
 Tighten the fuel cap before transporting.