Need help?Do you have a question about the Villager VST 50 and is the answer not in the manual?
Symbols for manual reading, maintenance safety, and personal protective equipment.
DANGER and WARNING messages about machine capabilities and serious injury.
Operator's responsibility and requirements for reading manual and training.
Keep clear of moving parts, stop engine for maintenance, use safety levers.
Inspect after impact, disconnect spark plug wire before cleaning/repair.
Ventilation, avoid alcohol/drugs, keep bystanders away, plan throwing pattern.
Shut off engine, wait for parts to stop, use clean-out tool.
Check safety devices, disengage controls, disconnect spark plug wire.
Read and follow all warnings and instructions before operating.
How to engage the augers and wheel drive using control levers.
Handle gasoline safely; never fuel indoors or hot engine; fill tank outdoors.
Safely clear clogged chutes using the clean-out tool after stopping the engine.
How to engage the drive system using throttle and shift lever.
Never shift while moving; stop machine first to prevent premature wear.
Disengage controls and stop engine before any lubrication or maintenance.
Procedure to check and maintain the correct engine oil level.
Important steps and schedule for changing engine oil to prevent damage.
Never store with fuel indoors or in poorly ventilated areas due to fumes.
Empty fuel system for storage over 30 days to prevent deposits and damage.
Remove fuel from engine and tank; use stabilizer if needed.
General| Brand | Villager |
|---|---|
| Model | VST 50 |
| Category | Snow Blower |
| Language | English |
To Next Page