Need help?Do you have a question about the Vilter VSR 111-301 and is the answer not in the manual?
General| Model | VSR 111-301 |
|---|---|
| Category | Compressor |
| Frequency | 60 Hz |
| Phase | 3 |
| Type | Screw |
| Refrigerant | Ammonia (R717) |
| Voltage | 460 V |
Inspect unit upon arrival for damage and report any issues to the transport company.
Detailed procedures for leak testing ammonia and halocarbon systems, including evacuation.
Provides a schedule for daily, weekly, monthly, quarterly, and yearly maintenance checks.
Step-by-step guide for calibrating the slide valve actuator motor control module.
Troubleshooting common issues related to the slide valve actuator's operation and calibration.
Covers oil charge, filter maintenance, pressure regulation, and cooling methods for the oil system.
Explains compressor control, slide valve operation, safety setpoints, and initial start-up procedures.
Details setting controls, valve settings, oil separator, and pre-start up checks for safe operation.
Checklist for field piping and mechanical requirements before compressor start-up.
Checklist for field wiring requirements before compressor start-up.
To Next Page