Lens release lever
EF-S Lens mount index
EF Lens mount index
Camera lens mount index
Contacts (camera side)
Contacts (lens side)
Tripod mount socket
Tripod mount screw
Tripod mount knob
Tripod socket
Certification/
Regulatory logos
Thank you for purchasing a Viltrox product.
◎ This adapter is connected to the lens and also affect the performance
of the lens.
1.Attach the included tripod mount to the adapter by firmly turning the
tripod mount knob.
Please make sure that the tripod mount is facing in the correct direction in
relation to the adapter.
2. Attach the tripod using the tripod mount socket.
Securely attach the tripod while firmly hoding the adapter.
The size and weight listed are for the adapter only.All data listed is measured according to Canon standards.
Specifications subject to change without notice.For more information, please visit www.viltrox.com
Mount Adapter EF-NEX
Instructions User manual
1.Attach the EF lens to the EF mount side of the adapter.
Insert the lens into the adapter by aligning the mount index found on the EF
lens (red circle) with the same mark found on the adapter,and turn the EF
lens clockwise until you hear a click.(fig. )
When attaching an EF-S mount index marks (white squares) and turn the
lens clockwise.(fig. )
2.Mount the adapter to the camera.
Insert the adapter into the camera by aligning the Sony E-mount lens mount
index found on the adapter (white circle) with the same mark found on the camera,
and turn the adapter counter clockwise until you hear a click.(fig. )
When using a tripod with EF lenses that are equipped with a tripod mount, such as super
telephoto lenses,please be sure to use it to mount the lens to the tripod.
① ② ③
④ ⑤
Compatible lenses
Compatible cameras
Front mount
Rear mount
Tripod Socket
Max.Diameter and Length
Weight
Front Cap
Rear Cap
JYC Technology(HK)Co.,Ltd.
10
N118
EF series lenses
◎
Detaching
Procedures
◎ Mounting Procedures
1. Turn the camera OFF,and detach teh adapter from the camera while
the EF lens is still attached to it.
Turn the adapter counter clockwise the while pressing the camera's lens
release button.(fig. )
Detach the adapter once it has stopped turning.
2. Detach the EF lens from the adapter.
Turn the EF lens counter clockwise while pushing the lens release lever
found on the adapter.(fig. )
Detach the EF lens once it has stopped turning.
3.Precautions when using this adapter with a tripod
When shooting with a tripod,do not use the camera’s tripod mount socket
while the adapter is attached.Be sure to use the tripod mount included
with the adapter.
NEX series camera
Canon EF mount compliant
Sony E-mount compliant
Cu 1/4 × 1
66.6 26 mm×
Approx. 125 g
Camera Cover
Lens Dust Cap
The Lens Mount Adapter EF-NEX is designed to allow Sony E- ount
series lenes to be used with E-mount lens compatible interchangeable-lens
digital cameras lenses.Before using this adapter, please make sure that
the camera and the lens is compatible.
m
1. If the adapter cannot work on NEX series cameras,Please updated the
camera to 04 or up version.
2. After set the adapter on the EF-NEX lens ,Be remember to set the M
mode change to A mode.Please restart the camera if it cannot Auto focus.
3. It will not affect the performance of lens after seting the adapter ring on the lens.
4. Please use the switch on the lens to set the lens function. If the settings
in the camera menu and set on the lens, and is subject to the settings on the lens.
5. When you use the lens is much heavier than the camera, be sure to move
the camera and shoot holding the lens. Will increase the minimum focusing
distance of the lens adapter is connected, so the maximum magnification
and field of view may change.
①
②
③
④
⑤
Nomenclature
Attentions
Specifications
Attaching the tripod mount
Mounting and Detaching the Adapter
To Next Page
Need help?
General