Vimar ELVOX EKKO 300A - EC Declaration of Conformity

9
EKKO
The undersigned, representing the following manufacturer Vimar SpA
Viale Vicenza, 14 - 36063 Marostica (VI) Italy
herewith declares that the products
OPERATORS FOR GATES WITH SWING DOORS - SERIES EKKO
Articles
Trade mark Type ref. Cat. ref. Description
Elvox EAM8.L EAM8.L Non-reversible 230 V electromechanical linear left operator for swing gates up to 3 m and 200 kg,
complete with adjustable mounting brackets
Elvox EAM9.L EAM9.L Idem, for swing gates up to 4 m and 200 kg
Elvox EAM8.R EAM8.R Non-reversible 230 V electromechanical linear right operator for swing gates up to 3 m and 200 kg,
complete with adjustable mounting brackets
Elvox EAM9.R EAM9.R Idem, for swing gates up to 4 m and 200 kg
are in conformity with the provisions of the following EC directive(s) (including all applicable amendments) and that
the following standards and/or technical specications have been applied
Machinery Directive 2006/42/EC
LV Directive 2006/95/EC: EN 60335-2-103 (2003)
EMC Directive 2004/108/EC: EN 61000-6-3 (2007), EN 61000-6-2 (2005),
Further hereby declares that the product must not be put into service until the nal machinery into which it is to
be incorporated has been declared in conformity with the provisions of Directive 2006/42/EC, where appropriate.
Declares that the relevant technical documentation is compiled by Vimar SpA and in accordance with part B of An-
nex VII of Directive 2006/42/EC and the following essential requirements of this Directive are applied and fullled:
1.1.1, 1.1.2, 1.1.3, 1.1.5, 1.1.6, 1.2.1, 1.2.2, 1.2.6, 1.3.1, 1.3.2, 1.3.3, 1.3.4, 1.3.7, 1.3.8, 1.3.9, 1.4.1, 1.4.2, 1.5.1,
1.5.2, 1.5.4, 1.5.5, 1.5.6, 1.5.7, 1.5.8, 1.5.9, 1.6.1, 1.6.2, 1.7.1, 1.7.2, 1.7.3, 1.7.4
I undertake to make available, in response to a reasoned request by the national authorities, any further supporting
product documents they require.
Marostica, 24/02/2015
The Managing Director
Note: The contents of this declaration correspond to what declared in the last revision of the ofcial declaration available before printing this manual. The text herein has been
re-edited for editorial purposes. A copy of the original declaration can be requested to Vimar SpA
EC DECLARATION OF CONFORMITY
(Declaration of incorporation of partly completed machinery annex IIB 2006/42/EC)
No. : ZDT00585.00
EN