EN
25
K40980 - K40981
Video door entry system installation
General considerations:
The procedure to follow when installing a IPo2W video
door entry system for one or two families is described
below.
2) Take care to connect the outdoor station and each indoor
Connection cables that can be used:
LED is on
turns on the call button backlights
indoor stations are active if the display is active and
(activation takes about 20s)
Note: in an IPo2W system, the indoor stations must be the
Considerations for the connection
- Star
- Daisy chain (or input to output)
- Mixed (star and daisy chain)
terminals protected by a plastic case, for the mains
2) At the bottom of the device there is a port for connecting
recommend connecting cables of the same colour to the
polarised, so there is no need to connect the terminals at the
To Next Page
Loading...
